Innovation
NETON: new technologies in the Spanish New Space value chain for VHR+ Earth observation

Sanzar Group is part of the consortium of the NETON project, which has received a grant from the Spanish Centre for Technological Development and Innovation (CDTI) under the 2024 call of the Space Technology Programme (Order CNU/462/2024), linked to the Aerospace PERTE. The project is funded by the Spanish Ministry of Science, Innovation and Universities and by CDTI, with European Union NextGenerationEU funds through the Recovery, Transformation and Resilience Plan.
- Project: NETON, new technologies in the Spanish New Space value chain for VHR+ Earth observation
- Programme: Space Technology Programme 2024, Aerospace PERTE
- Duration: 30 months, from July 2024 to December 2026
- Coordinator: SATLANTIS
What NETON is
NETON is the challenge taken on by Spanish New Space science and industry to design very high resolution Earth observation missions in the visible and near infrared. The goal is to have Spanish-made cameras with a resolution of 50 cm or better, on board small, low-cost satellites.
The project works on the most critical subsystems of such a mission: mirror-based optics, active focusing, the payload’s on-board electronics, attitude control and AI-based image processing.
Objectives
The general objective of NETON is to advance scientific and technological knowledge on the most critical subsystems of a fully Spanish mission, solving the main challenges of a very high resolution mirror-based optical camera, and to define a roadmap to reach the market through the disruption these subsystems bring.
The specific objectives of the consortium are:
- To advance research on space technologies that are critical for the future development of a very high performance Earth observation mission (spatial resolution of 50 cm or better, with agility), giving Spain a capability it does not have today, with small, low-cost space assets.
- To strengthen the national industrial ecosystem by involving leading players of the Spanish space sector, especially New Space, maturing space technologies and digital tools that matter for Spain and globally, so that the national sector gains disruptive capabilities in niches of the value chain that place it in a position of technological leadership.
- To promote collaboration between companies and research centres to drive scientific and technological progress beyond the current state of the art in the research, design and validation of space systems and critical applications.
- To give the Spanish space ecosystem knowledge that increases its ability to take part in future space missions, with a roadmap defined up to the development, deployment and operation of the assets studied.
Consortium
The project is promoted by a group of four companies, SATLANTIS, LIDAX Ingeniería, SANZAR and GeoAI Tech, with contributions from four research centres: INTA, Tekniker, IDR and Universidad Camilo José Cela.
The consortium works together to design a high performance optical system with resolutions of 50 cm or better. Enagás takes part as end user, with use cases for very high resolution monitoring of linear infrastructure developed on an artificial intelligence platform. All of this follows the New Space model, with costs and timelines beyond the reach of large manufacturers.
SATLANTIS leads the consortium, drawing on its experience leading two large consortia in the European EDIDP programme around its commercial iSIM technology. The next generation of technology requires a multi-specialist consortium, with a major technical contribution from SMEs and a scientific one from public research organisations.
What Sanzar Group does in NETON
Sanzar Group develops the attitude determination and control subsystem. Instead of classic reaction wheels, it uses control moment gyroscopes (CMGs), a technology so far reserved for large missions, in its own linear configuration and with custom control software.
The goal is for a 100 to 200 kg satellite to slew at up to 21.8 degrees per second with a pointing precision of up to 0.0001 degrees on all three axes. The system is validated on an air bearing table with simulated interfaces, in line with the European ECSS standards.

